Index / MCP servers / Dive Kit

Dive Kit MCP server

Dive Kit is an MCP server with 18 tools an agent can call, among them best_mix, blend_continuous, buoyancy_check. It answers at https://api.divekit.app/mcp over streamable HTTP, and it listed its tools to an anonymous client, so no sign-in was needed for that. Our probes reached it 4 of 4 times since 28 September 2026; the last check, on 14 November 2026, succeeded.

Status
Answering
Tools
18
Official
yes, served from divekit.app
Reliability
4 of 4 checks
Response time
360 ms
Transport
streamable HTTP
Last checked
14 November 2026

Experimental. Plan scuba decompression dives, gas blends and gas use with Dive Kit. Reference only.

Description as the publisher wrote it.

The 18 tools Dive Kit offers

ToolWhat it does
best_mixUse this when the diver asks what gas to breathe at a depth or which deco gases to carry: returns the richest bottom mix within a PPO₂ limit (default 1.4 bar) and an END limit (default 30 m, 98 ft), the nearest standard fill inside the same
Inputs: units, depth, ppo2_max, target_end, water, temperature
blend_continuousReturns the settings for continuous-flow blending through a compressor intake: each feed gas's share of the intake flow, the analyzer readings to aim for after the first injection and at the end, and the pressure to bleed to first when the
Inputs: units, current, target, altitude, injection_order, bleed_step
buoyancy_checkReturns a weighting check for one rig: how much lead to add or remove to be neutral at the end of the dive, the net buoyancy at the start (full cylinders at the target depth) and the end (near-empty cylinders at 3 m), what a flooded drysuit
Inputs: units, water, target_depth, cylinders, exposure, wing
check_no_decoUse this when the diver asks how long they can stay at a depth without decompression stops (no-deco limit, NDL, no-stop time). Returns the minutes left after the descent at GF high, the PPO₂ of the gas there and its MOD at 1.4 bar, a safety
Inputs: units, depth, bottom_time_min, oxygen_pct, helium_pct, gradient_factors
convert_unitsConverts one diving figure between units: pressure (bar, psi, MPa), volume (L, ft³), depth (m, ft), temperature (°C, °F, K), weight (kg, lb) and breathing rate (L/min, ft³/min, bar/min, psi/min). Use this when a diver gives a figure in the
Inputs: quantity, value, from, to, cylinder_size
decantReturns what happens when two cylinders are joined with a transfill whip: the pressure both settle to, each cylinder's pressure and mix afterwards, and how much gas moved. With a target mix it also returns where to close the valve, the mix
Inputs: units, receiver, donor, target, altitude
find_max_bottom_timeFinds the longest whole-minute bottom time on one level of an open-circuit plan: the longest that keeps every cylinder at or above its reserve (limit reserve), whose time to surface fits a budget (limit tts), or that needs no stop (limit no
gas_specsReturns the facts for one breathing gas: maximum operating depth (MOD) at its Dive Kit PPO₂ band cap and at 1.4 bar, minimum depth for hypoxic mixes and, at a depth, PPO₂, equivalent narcotic depth (END), equivalent air depth (EAD) and gas
Inputs: units, oxygen_pct, helium_pct, depth, ppo2_max, water
gas_usageReturns the gas one open-circuit cylinder spends over a planned profile: per segment the gas used (volume and pressure), what is left, the runtime and a status, plus the reserve, the turn pressure and the first segment that drops below each
Inputs: units, preset, cylinder_size, rated_pressure, twinset, start_pressure
get_guideReturns one section of the Dive Kit planning guide as markdown. Use this when you need to explain a term, a warning or deco theory, or to check what a planning conversation needs: workflow, tool chains, every input with unit, default and ra
Inputs: topic
lookup_certificationsReturns diving certifications from Dive Kit's vetted open dataset of agencies and courses: prerequisites, equivalent courses at other agencies, depth and gas limits, notes and links. Use this when a diver asks what a course allows ("what do
Inputs: query, agency, category, id
lookup_cylindersReturns scuba cylinders from Dive Kit's vetted open cylinder dataset: water volume, rated capacity, working pressure, material, typical use and, for five or fewer matches, weight, buoyancy and brands. Each row gives the plan_dive cylinder f
Inputs: query, material, units
lookup_referencesReturns vetted references from Dive Kit's open references dataset, with links. Use this when a diver asks for a source. Call it before answering any question about deco theory, physiology, gas limits, blending practice, standards or trainin
Inputs: query, topic, type, limit
mix_resultReturns the mix and pressure a cylinder ends with after gases are added in order: each addition's pressure and mix before and after, the cooling step, and the final O₂ %, He % and pressure. Use this when a diver or blender asks what a fill
Inputs: units, current, additions, environment
plan_blendReturns a partial-pressure blending plan from what a cylinder holds to a target mix and pressure: bleed, helium, oxygen and top-up steps with the gauge pressure to stop at, the mix after each step, the cooling step, the mix achieved, the ga
Inputs: units, current, target, banks, environment, max_plans
plan_diveComputes the decompression plan for one dive, open circuit (OC) or closed-circuit rebreather (CCR): stop table, runtime, time to surface (TTS), gas used per cylinder, ascent pressure, CNS/OTU, gas density, warnings, contingencies, CCR bailo
read_share_linkDecodes a Dive Kit share link (https://divekit.app/share/deco-plan/...) into the plan_dive input it carries: profile, gases, CCR rig, settings, custom contingencies, modifiers and repetitive tissue state, in the requested units. Use this wh
Inputs: url, units
rmv_sacReturns the gas consumption rate computed from a logged dive's cylinder pressures: RMV (surface litres a minute, what plan_dive and gas_usage take) and SAC (pressure drop a minute on that cylinder), overall and per segment. Use this when a
Inputs: units, segments, water

Add Dive Kit to your AI client

Every block below points at https://api.divekit.app/mcp. Pick your client and copy.

Claude Code: one command in your terminal
claude mcp add --transport http dive-kit https://api.divekit.app/mcp
Claude Desktop: claude_desktop_config.json
{
  "mcpServers": {
    "dive-kit": {
      "command": "npx",
      "args": ["-y", "mcp-remote", "https://api.divekit.app/mcp"]
    }
  }
}
Cursor: ~/.cursor/mcp.json, or .cursor/mcp.json in a project
{
  "mcpServers": {
    "dive-kit": {
      "url": "https://api.divekit.app/mcp"
    }
  }
}
VS Code and GitHub Copilot: .vscode/mcp.json
{
  "servers": {
    "dive-kit": {
      "type": "http",
      "url": "https://api.divekit.app/mcp"
    }
  }
}
Zed: Zed settings.json
{
  "context_servers": {
    "dive-kit": {
      "url": "https://api.divekit.app/mcp"
    }
  }
}
Windsurf: ~/.codeium/mcp_config.json
{
  "mcpServers": {
    "dive-kit": {
      "serverUrl": "https://api.divekit.app/mcp"
    }
  }
}
JetBrains AI Assistant: Settings, Tools, AI Assistant, MCP, New MCP Server, as JSON
{
  "mcpServers": {
    "dive-kit": {
      "url": "https://api.divekit.app/mcp"
    }
  }
}
Continue: .continue/mcpServers/neuronto.yaml
name: Dive Kit
version: 0.0.1
schema: v1
mcpServers:
  - name: Dive Kit
    type: streamable-http
    url: https://api.divekit.app/mcp
Gemini CLI: ~/.gemini/settings.json
{
  "mcpServers": {
    "dive-kit": {
      "httpUrl": "https://api.divekit.app/mcp"
    }
  }
}
Codex CLI: MCP server config
{
  "mcpServers": {
    "dive-kit": {
      "type": "http",
      "url": "https://api.divekit.app/mcp"
    }
  }
}
Warp: MCP servers, + Add, paste JSON
{
  "mcpServers": {
    "dive-kit": {
      "url": "https://api.divekit.app/mcp"
    }
  }
}
Goose: a one-click extension link
goose://extension?url=https%3A%2F%2Fapi.divekit.app%2Fmcp&type=streamable_http&id=dive-kit&name=Dive%20Kit

Is Dive Kit up right now?

It answered our last check on 14 November 2026 in 360 ms. Over 4 checks since 28 September 2026 it answered 4. Status here comes from Neuronto's own probes, not from the publisher.

MCP servers similar to Dive Kit

Questions about Dive Kit

Is there an official Dive Kit MCP server?

Yes. It is published by divekit.app and served from api.divekit.app, the vendor's own domain: https://api.divekit.app/mcp.

How many tools does Dive Kit have?

18, as returned by the server's own tools/list on 17 November 2026: best_mix, blend_continuous, buoyancy_check, check_no_deco, convert_units, decant, find_max_bottom_time, gas_specs, and 10 more.

Is Dive Kit down?

It answered our last check on 14 November 2026 in 360 ms. Over 4 checks since 28 September 2026 it answered 4.

How do I add Dive Kit to Cursor?

Put the server under mcpServers in ~/.cursor/mcp.json with the URL https://api.divekit.app/mcp. The exact JSON is above, with the same setup for Claude Code, Claude Desktop, VS Code, Windsurf, Zed, Gemini CLI and the rest.

Does Dive Kit need an API key?

It listed its tools to an anonymous client, so reading the tool list needs no key. Individual tools can still ask for credentials in their own inputs.

Where this comes from

Publisher: app.divekit. Endpoint host: api.divekit.app. ARD identifier: urn:air:app.divekit:mcp:mcp. First indexed 28 September 2026. The tools are exactly what the server returned; nothing on this page is inferred from its name. Ranking in Neuronto search is never for sale.

Is this your server? Get a message the day it stops answering or its tools change: monitoring, 14 days free. Or claim the domain to manage how it is listed.