Index / MCP servers / NestingCalc Calculators

NestingCalc Calculators MCP server

NestingCalc Calculators is a remote MCP server that gives an AI agent 37 tools, among them baluster_spacing_calculator, board_feet_calculator, bom_costing. It answers at https://mcp.nestingcalc.com/mcp over streamable HTTP, and it listed its tools to an anonymous client, so no sign-in was needed for that. Our probes reached it 4 of 4 times since 24 September 2026; the last check, on 8 November 2026, succeeded.

Status
Answering
Tools
37
Official
yes, served from nestingcalc.com
Reliability
4 of 4 checks
Response time
333 ms
Transport
streamable HTTP
Last checked
8 November 2026

37 cutting and woodworking calculators: cut lists, sheet nesting, timber volume, kiln drying

Description as the publisher wrote it.

The 37 tools NestingCalc Calculators offers

ToolWhat it does
baluster_spacing_calculatorEqual baluster/spindle spacing for a run: number of balusters, exact gap and positions. Enforces a maximum gap (e.g. the 4-inch / 100 mm sphere code rule).
Inputs: run_mm, baluster_width_mm, max_gap_mm
board_feet_calculatorCalculate board feet and lumber cost (thickness x width x length / 144 in inches). Accepts multiple boards and an optional price quoted per board foot or per MBF (thousand board feet).
Inputs: unit, boards, price, price_unit
bom_costingBill-of-materials cost roll-up for furniture: buy quantity = net qty x (1 + waste%, verified presets: S4S lumber 18%, rough 28%, nested panels 10%, hardware 3%), line and total costs, cost per product and a selling price from a target margi
Inputs: lines, products, margin_pct, labor_per_product
cbm_shipmentPacking CBM for cartons: per-line and lot volume (m3), total weight and lot density, with a cube-out / weigh-out verdict against the 40HC balanced density (390 kg/m3 - same presets as container loading).
Inputs: lines
cnc_feeds_speedsCNC spindle RPM and feed rate from tool diameter, flute count, chip load and cutting speed. Works for routers and mills, metric and imperial.
Inputs: unit, machine, tool_diameter, flutes, chip_load, cutting_speed
container_loadingHow many uniform cartons fit in a shipping container before cube-out or weigh-out. Presets: 20GP (33.2 CBM nominal, 28,200 kg payload), 40GP (67.7 CBM, 26,700 kg), 40HC (76.4 CBM, 68 usable, 26,500 kg) — all editable. Returns max pieces by
Inputs: container, usable_cbm, payload_kg, piece_l_m, piece_w_m, piece_h_m
cutting_speed_calculatorCutting speed from spindle speed: Vc = pi*D*n/1000 metric (m/min), SFM = pi*D*n/12 imperial. Always also returns the same speed converted to the other unit system. Includes a web_url with the calculation prefilled.
Inputs: unit, diameter, rpm
embroidery_resizeResize an embroidery design file (PES or DST) by a scale percentage. Returns stitch stats before/after, a density safety verdict (safe within +/-15%) and the resized file as base64.
Inputs: file_base64, scale_percent
firewood_calculatorConvert firewood volume between cord (128 ft3), stere/Raummeter (stacked m3), solid m3 (Festmeter), loose m3 and ft3, with optional weight estimate by wood species (dry/fresh).
Inputs: value, from, loose_factor, solid_factor, species, moisture
flooring_calculatorLaminate/vinyl plank takeoff: planks, boxes and cost with offcut reuse between rows (best-fit), expansion gap, layout waste presets and direction.
Inputs: room_width_m, room_length_m, plank_width_mm, plank_length_mm, expansion_mm, layout
glass_price_calculatorCut-to-size glass cost and weight estimate: net area with optional waste allowance, weight (2.5 kg/m2 per mm of thickness), material cost from your price per m2, optional polished-edge work per running metre, total and per-piece cost. Inclu
Inputs: width_mm, height_mm, thickness_mm, quantity, price_per_m2, edge_price_per_m
glue_consumptionWood adhesive quantity: bond area x spread (g/m2, TDS presets like PVAc D3 175, EGP 250, finger-joint PUR 530) x application faces x waste allowance. Also computes bond area for edge-glued panels (joints from board width) and face laminatio
Inputs: bond_area_m2, edge_panel, face_lam, spread_gsm, faces, waste_pct
green_log_weightWeight of a roundwood/log batch at any moisture content: W = volume x basic density x (1 + MC/100), per USDA Wood Handbook 2021 Ch.4. Presets for 14 verified species (acacia, rubberwood, eucalyptus, oak, teak, spruce...) or a custom basic d
Inputs: species, basic_density_kg_m3, volume_m3, mc_pct
hoppus_volumeHoppus (quarter-girth) volume of round logs from mid-length circumference and length: (C/4)^2 x L. Returns Hoppus volume, true volume (x 4/pi), Hoppus tons (50 h ft3) and a board-feet approximation, with optional quantity and value per Hopp
Inputs: unit, circumference, length, qty, price_per_hoppus_unit
jas_log_scaleJapanese Agricultural Standard (JAS) log scale: official diameter rounding (floor to 1 cm below 14 cm, even 2 cm at 14 cm and above), oval-log averaging, optional +2 cm ovality adjustment and the length allowance for logs over 6 m. Volume p
Inputs: diameter_small_cm, diameter_long_cm, length_m, oval_adjust, qty
kiln_capacityKiln charge capacity: wood volume per batch (AH-188 / TechDrying). V_wood = D×R×C × t/(t+s) × f where t=board thickness, s=sticker thickness, f=fill factor (0.85–0.95). Returns wood volume in m³ and board feet (1 m³ = 423.77 BF).
Inputs: length_m, width_m, height_m, board_thickness_mm, sticker_thickness_mm, fill_factor
linear_cutting_optimizerOptimize 1D cutting plans for bars, pipes and profiles (linear cutting stock problem, best-fit decreasing heuristic). Returns bars used, per-bar cut lists with positions, total waste and unplaced parts. A web_url with the plan prefilled is
Inputs: unit, stock_length, stock_count, kerf, trim, parts
log_volumeCubic volume of a log by classical formula: Huber (mid diameter only), Smalian (both end diameters) or Newton (all three, most accurate). Metric (cm, m) or imperial (in, ft); returns volume in m3 and ft3.
Inputs: method, unit, diameter_small, diameter_mid, diameter_large, length
lumber_weight_calculatorWeight of lumber by species, dimensions, quantity and moisture (dry/fresh), using species density tables. Optional custom density in kg/m3.
Inputs: species, thickness_mm, width_mm, length_m, qty, moisture
manufacturing_yieldCumulative yield through a wood production chain (sawing -> drying -> machining -> finishing). Multiplies stage yields, shows per-stage loss and computes the roundwood volume needed for a target finished volume.
Inputs: stages, target_output_m3
metal_weight_calculatorWeight of metal stock per profile: pipe/tube (OD + wall), round bar, square/rectangular tube, flat bar, angle, beam/I-beam. Materials: steel, stainless, aluminum, copper, brass.
Inputs: profile, material, length_m, qty, od_mm, wall_mm
miter_angle_calculatorMiter angles three ways: corner mode (any corner angle between two pieces), sides mode (regular polygon with N sides), crown mode (miter + bevel for crown molding at a spring angle).
Inputs: mode, corner_angle_deg, sides, spring_angle_deg
moisture_contentWood moisture content (WH-2021 Ch.4 Eq. 4-1..4-4). Two modes: (1) sample-based MC_od/MC_wb from wet+dry masses; (2) drying outcome — mass + water lost when going from start MC to target MC. Optional Gb (kg/m³) returns MCmax and MCsink. Basi
Inputs: mode, wet_mass, dry_mass, start_mass, start_mc_pct, end_mc_pct
paint_coverageWood finishing paint quantity. Technical route: theoretical coverage = 10 x %volume solids / DFT(um), multiplied by transfer efficiency (conventional spray 30-35%, airless ~50%, HVLP ~65-90%, brush/roller ~90%); or a data-sheet coverage in
Inputs: area_m2, coats, coverage_m2_per_l, solids_pct, dft_microns, transfer_eff_pct
rebar_takeoffRebar weight takeoff (d2/162 rule): total length, weight in kg and bars per tonne for a list of rebar lines. Supports metric mm bars and US # sizes as diameters.
Inputs: lines
rough_sizingRough sizing — convert between finished (planed, kiln-dried) and rough-sawn dimensions before drying and planing. Adds planing allowance (default 2.5 mm/face) + saw kerf (default 2.2 mm band) and applies WH-2021 Eq. 4-9 shrinkage. Direction
Inputs: mode, finished_mm, rough_mm, planing_mm, kerf_mm, species
rpm_calculatorSpindle speed (RPM) from cutting speed: n = Vc*1000/(pi*D) metric, n = Vc*12/(pi*D) imperial. Metric takes diameter in mm and Vc in m/min; imperial takes diameter in inches and Vc in SFM. Includes a web_url with the calculation prefilled.
Inputs: unit, diameter, cutting_speed
sawmill_recoverySawmill recovery rate (lumber recovery factor): sawn volume out / roundwood volume in, benchmarked against FAO/EU/SE-Asia reference ranges. Also computes log-rule overrun/underrun: (actual BF - rule BF) / rule BF — Doyle underestimates smal
Inputs: input_volume_m3, output_volume_m3, log_rule_bf, actual_bf
sheet_cutting_optimizerOptimize 2D guillotine cutting plans for plywood, MDF, glass, sheet metal (2D nesting with kerf, per-part rotation lock for grain direction, optional sheet trim and multiple stock sizes). Returns sheets used, piece positions, utilization, e
Inputs: unit, stock_width, stock_height, stock_count, stocks, kerf
sheet_metal_gaugeConvert sheet metal gauge to thickness (mm) or thickness to gauge, and compute sheet weight for steel, stainless, aluminum or galvanized steel.
Inputs: mode, material, gauge, thickness_mm, width_mm, length_mm
stowage_factorStowage factor SF = cargo volume (m3) / cargo mass (tonnes), with classification against the IMO CSS Code Table 4.1 reference ranges for wood cargoes (sawn timber, tropical logs, plywood...).
Inputs: volume_m3, tonnes
tile_calculatorTiles, boxes and cost for a room: room and tile dimensions, grout width, waste factor by layout pattern (straight, offset, diagonal, herringbone...), optional box size and prices.
Inputs: room_width_m, room_length_m, tile_width_mm, tile_length_mm, grout_mm, layout
timber_beam_capacityAllowable load on a simply supported rectangular timber beam (planning estimate, Eurocode 5 conventions, EN 338 grades C16-D40/D24-D40). Returns allowable UDL and center point load (gross and net of self-weight), governing mode (bending vs
Inputs: span_mm, width_mm, height_mm, grade, load_type
timber_unit_converterConvert timber quantities between m3, ft3, board feet, MBF, Hoppus ft3, Hoppus m3 and Hoppus tons, and translate a price quoted in any unit into $/m3 and $/MBF (1 MBF = 2.3597 m3).
Inputs: value, from, qty, price, price_per
wallpaper_calculatorWallpaper rolls needed for a wall, accounting for pattern repeat and openings. Use a standard roll preset (eu, us-single, us-double, commercial54) or custom roll dimensions.
Inputs: wall_width_m, wall_height_m, roll_preset, roll_length_m, roll_width_m, pattern_repeat_m
wood_emcEquilibrium moisture content (EMC) from temperature and RH using the Hailwood–Horrobin sorption model (Simpson 1973 coefficients, desorption branch — WH-2021 Ch.4 Table 4-2). Optional reverse mode: target MC → required RH at the given tempe
Inputs: mode, temp_c, rh_pct, target_mc_pct, branch
wood_shrinkageWood shrinkage from a start MC to an end MC (WH-2021 Eq. 4-9: S_x = S_od × (1 − x/FSP)). Direction: tangential (board width) or radial (board thickness) or volumetric. Picks a species from the wood-species table (16 verified species) or acc
Inputs: species, custom_shrink_od_pct, custom_fsp_pct, start_mc_pct, end_mc_pct, dimension_mm

Add NestingCalc Calculators to your AI client

Every block below points at https://mcp.nestingcalc.com/mcp. Pick your client and copy.

Claude Code: one command in your terminal
claude mcp add --transport http nestingcalc-calculators https://mcp.nestingcalc.com/mcp
Claude Desktop: claude_desktop_config.json
{
  "mcpServers": {
    "nestingcalc-calculators": {
      "command": "npx",
      "args": ["-y", "mcp-remote", "https://mcp.nestingcalc.com/mcp"]
    }
  }
}
Cursor: ~/.cursor/mcp.json, or .cursor/mcp.json in a project
{
  "mcpServers": {
    "nestingcalc-calculators": {
      "url": "https://mcp.nestingcalc.com/mcp"
    }
  }
}
VS Code and GitHub Copilot: .vscode/mcp.json
{
  "servers": {
    "nestingcalc-calculators": {
      "type": "http",
      "url": "https://mcp.nestingcalc.com/mcp"
    }
  }
}
Zed: Zed settings.json
{
  "context_servers": {
    "nestingcalc-calculators": {
      "url": "https://mcp.nestingcalc.com/mcp"
    }
  }
}
Windsurf: ~/.codeium/mcp_config.json
{
  "mcpServers": {
    "nestingcalc-calculators": {
      "serverUrl": "https://mcp.nestingcalc.com/mcp"
    }
  }
}
JetBrains AI Assistant: Settings, Tools, AI Assistant, MCP, New MCP Server, as JSON
{
  "mcpServers": {
    "nestingcalc-calculators": {
      "url": "https://mcp.nestingcalc.com/mcp"
    }
  }
}
Continue: .continue/mcpServers/neuronto.yaml
name: NestingCalc Calculators
version: 0.0.1
schema: v1
mcpServers:
  - name: NestingCalc Calculators
    type: streamable-http
    url: https://mcp.nestingcalc.com/mcp
Gemini CLI: ~/.gemini/settings.json
{
  "mcpServers": {
    "nestingcalc-calculators": {
      "httpUrl": "https://mcp.nestingcalc.com/mcp"
    }
  }
}
Codex CLI: MCP server config
{
  "mcpServers": {
    "nestingcalc-calculators": {
      "type": "http",
      "url": "https://mcp.nestingcalc.com/mcp"
    }
  }
}
Warp: MCP servers, + Add, paste JSON
{
  "mcpServers": {
    "nestingcalc-calculators": {
      "url": "https://mcp.nestingcalc.com/mcp"
    }
  }
}
Goose: a one-click extension link
goose://extension?url=https%3A%2F%2Fmcp.nestingcalc.com%2Fmcp&type=streamable_http&id=nestingcalc-calculators&name=NestingCalc%20Calculators

Is NestingCalc Calculators up right now?

It answered our last check on 8 November 2026 in 333 ms. Over 4 checks since 24 September 2026 it answered 4. Status here comes from Neuronto's own probes, not from the publisher.

MCP servers similar to NestingCalc Calculators

Questions about NestingCalc Calculators

Is there an official NestingCalc Calculators MCP server?

Yes. It is published by nestingcalc.com and served from mcp.nestingcalc.com, the vendor's own domain: https://mcp.nestingcalc.com/mcp.

How many tools does NestingCalc Calculators have?

37, as returned by the server's own tools/list on 15 November 2026: baluster_spacing_calculator, board_feet_calculator, bom_costing, cbm_shipment, cnc_feeds_speeds, container_loading, cutting_speed_calculator, embroidery_resize, and 29 more.

Is NestingCalc Calculators down?

It answered our last check on 8 November 2026 in 333 ms. Over 4 checks since 24 September 2026 it answered 4.

How do I add NestingCalc Calculators to Cursor?

Put the server under mcpServers in ~/.cursor/mcp.json with the URL https://mcp.nestingcalc.com/mcp. The exact JSON is above, with the same setup for Claude Code, Claude Desktop, VS Code, Windsurf, Zed, Gemini CLI and the rest.

Does NestingCalc Calculators need an API key?

It listed its tools to an anonymous client, so reading the tool list needs no key. Individual tools can still ask for credentials in their own inputs.

Where this comes from

Publisher: com.nestingcalc. Endpoint host: mcp.nestingcalc.com. ARD identifier: urn:air:com.nestingcalc:mcp:calculators. First indexed 24 September 2026. The tools are exactly what the server returned; nothing on this page is inferred from its name. Ranking in Neuronto search is never for sale.

Is this your server? Get a message the day it stops answering or its tools change: monitoring, 14 days free. Or claim the domain to manage how it is listed.